Home › magazine › wetrok conceptcar has wetbox system › 2010
Pump producer RFE has redesigned its low volume peristaltic pump used for injecting precise doses of chemicals in applications such as laundry and dishwashing equipment. The aim is to improve servicing of the unit in the field.
Whilst the internals and specification are the same as before, a change has been made to its housing, which now becomes
For ultrasonic cleaning of components and surfaces Weber Ultrasonics has developed a 250 kHz ultrasonic generator with a power output of 250 and 500 watt as well as transducers matched for these applications.
This allows parts to be cleaned within short cleaning cycles in an environmentally conscious manner, the company says. The frequency of the
Tecnovap has celebrated 25 years in developing steam cleaning solutions with a celebratory meeting of distributors at its headquarters in Italy. There president Giuliano Franchini introduced the company's new steam generator Steam Pressure.
Combining the power of steam with the mechanical action of water at high temperature, Steam Pressure is
The new Rotovac Steam-Chamber cleaning tool incorporates a patent pending dome design with a 360 degree vacuum slot to completely encapsulate all the heat and all the cleaning solution.
This gives the ability to clean in all directions at a higher flow while containing all the heat and solution, which Rotovac claims enables it to clean better and
Kimberly-Clark Professional has developed the Scott Slimroll Hand Towel and Dispenser system for locations where space is at a premium. Developed with the compact washroom in mind, this system is small enough to fit where it needs to be but not at the expense of capacity, claims Kimberly-Clark.
By using compressed winding technology the Scott
According to 3M, its new Scotch-Brite Surface Preparation Pads are suitable for use on a range of floor types including vinyl tile, marble, terrazzo and concrete - boasting high performance and reduced labour.
The new pads require only neutral pH cleaner or water to remove floor finish, leaving a clean surface ready for finish application. This