Home › magazine › product features
Battery powered B5 and B7 burnishers
25th of May 2015
The B5 and B7 are Tennant’s battery-powered walk-behind burnishers, which the company claims are ultra quiet with propane-like performance.
Features include consistent down pressure and pad speed; low sound level (as low as 63 dBA); standard active dust control with HEPA filtration for optimum indoor air quality; operator ergonomic and
Smooth burnish from Nilfisk BU800
25th of May 2015
Nilfisk has updated its BU800 battery burnisher with an easier-to-use design for smoother operation.
With its double-pivot pad driver design, the BU800 burnishing pad stays in alignment and allows the pad to follow the floor surface, leaving a more consistent gloss.
Adding to the ease of use is the self-lowering burnishing deck - when the palm
Ecolab MAXX2 for floor cleaning
25th of May 2015
In order to maintain appearance and prolong floor life Ecolab has developed the MAXX2 system of products which are non-CLP classified.
MAXX Isi2, for example, is an all-round floor finisher which contains a new generation of polymers. Its smooth protective film minimises dirt adhesion and enhances floor appearance while also offering resistance
Higher speeds with Numatic Hurricane floor polishers
25th of May 2015
Numatic’s Hurricane range of floor care equipment is designed to perform in the most arduous of conditions. The NuShine is a new addition developed for maximum performance at higher speeds.
NuShine is compact and manoeuvrable, says Numatic, and has complete directional control which makes for a consistently high standard of
Kärcher BDP 50/2000 RS battery floor polisher
25th of May 2015
The Kärcher BDP 50/2000 RS step-on battery floor polisher is designed to combine the manoeuvrability of push-along machines with the area performance of ride-on models.
The ultra high speed machine can be used on surfaces such as natural stone, PVC, linoleum or parquet. Turning circle is 130 cm, making it suitable for use in small spaces,
Diversey Care TASKI Jontec for polishing
25th of May 2015
Diversey Care says hard floors can be treated in three stages with its TASKI Jontec system.
First the surface is prepared for polish adhesion with solvented floor strippers TASKI Jontec No 1 and TASKI Jontec Prostrip.
The floor must then be protected in order to make maintenance more cost effective - whether it’s a matt or gloss finish.
RSS